User`s guide

Instrument Messages 6
N9320A Specturm Analyzer 139
Execution Conflict
The system messages listed below are execution conflicts,
indicating settings conflict during your operation.
-200 Execution Error
This is the generic syntax error for devices that cannot
detect more specific errors.
-222 Data out of range
A legal program data element was parsed but could not be
executed because the interpreted value was outside the legal
range defined by the device. The displayed results may be
clipped.
-223 Too much data not all points entered
Indicates that a legal program data element of block,
expression, or string type was received that contained more
data than the device could handle due to memory or related
device- specific requirements.
-224 Illegal parameter value
An attempt was made to select a user file that contains 0
bits. Select another user file that contains at least 1 bit.
-241 Hardware missing
Missing device hardware. For example, the RF board is not
installed.
-253 Corrupt media
A source media (possibly EEPROM) for a data file is corrupt.
This error is usually seen in conjunction with errors con-
cerning a certain file.
-300 Device-specific error
This is the device- specific error for devices that cannot
detect more specific errors.