User`s guide

4 N9320A Spectrum Analyzer
1Overview
• Preset/System (Local) accesses the softkeys to reset the
analyzer to a known state, if the analyzer is in the remote
mode, pressing this key returns the analyzer to the local
mode and enables front- panel control.
• Auto Tune search the signal automatically and locate the
signal to the center of the graticule. see “Auto Tune” on
page 73.
• BW/Avg activates the resolution bandwidth function and
accesses the softkeys that control the bandwidth functions
and averaging.
• Sweep/Trig accesses the softkeys that allow you to set the
sweep time, select the sweep mode and trigger mode of
the analyzer.
• View/Trace accesses the softkeys that allow you to store
and manipulate trace information.
• Det/Display accesses the softkeys that allow you to
configure detector functions and control what is displayed
on the analyzer, including the display line as well as the
testing of trace data against entered limits.
• MODE selects the measurement mode of your analyzer.
• Meas accesses the softkeys that let you make transmitter
power measurements such as adjacent channel power,
occupied bandwidth, and harmonic distortion, etc. Please
refer to “One- Button Measurements” on page 117.
• Marker accesses the marker control keys that select the
type and number of markers and turns them on and off.
• Marker-> accesses the marker function softkeys that help
you with the measurement.
• Peak Search places a marker on the highest peak.
• File/Print accesses the softkeys that allow you to
configure the file and printing system of the analyzer.
7 Data Control Keys including the arrow keys, back key, Enter
key, knob, and numeric keypad, change the numeric value of
an active function such as center frequency, start frequency,
resolution bandwidth, and marker position.