User`s guide

100 N9320A Spectrum Analyzer
4 Key Reference
Amptd Step
Auto Man
Allows you to set the step size of the power level
range of the tracking generator. The default setting is
one vertical scale division when in a logarithmic
amplitude scale.
Key access:
> Tracking Generator
Power
Sweep
Sweep the output offset of the tracking generator.
The analyzer continues to sweep the linear change
between strat and stop frequency when power sweep
is on. The input range is 0 dB to 10 dB.
Key access:
> Tracking Generator>More
Normalize Accesses the following softkeys.
Store Ref
(1->3)
Copies trace 1 into trace 3. Store Ref
(1->3) must be pressed before pressing
Normalize (On).
Key access:
> Tracking Generator >
More > Normalize
Normalize
On Off
Activates the normalize function. On
each sweep, the normalized trace (Trace
3) is subtracted from Trace 1 and the
result is added to the normalized
reference level.
The trace data is normalized with
respect to the normalized reference level,
even if the value of the normalized
reference level is changed. This function
remains in effect on all subsequent
sweeps until it is turned off.
The normalize function is most useful for
applying correction data to a trace while
making a stimulus response measurement
MODE
MODE
MODE
NOTE
Trace 1 should be in clear write mode prior to setting normalize to on.