Technical data

88 N9320A Programmer’s Guide

5 Command Reference

Store a Screen Image in a Graphic File

:MMEMory:STORe:SCReen <file_name>

Saves the current instrument screen image, as a graphic file,

to the specified file in memory. The file must have a jpg file

extension. The specified file extension determines which file

format the instrument will use to save the image.

Example: :MMEM:STOR:SCR myscreen.jpg

Remarks: This command will fail if the <file_name> already exists.

Key access: > Save> Type > Screen

Store an Instrument State in a File

:MMEMory:STORe:STATe 1,<file_name>

Saves the instrument state to the file in memory. This file

data is only readable by the analyzer.

Example: :MMEM:STOR:STAT 1,mystate.sta

Remarks: This command will fail if the <file_name> already exists.

Store a Trace in a File

:MMEMory:STORe:TRACe <label>,<file_name>

Saves the specified trace to a file in memory. The file name

must have a file extension of csv or trc. The file extension

determines whether just the trace data is stored, or the

trace is stored with its state. The .csv extension uses the

CSV (comma- separated values) format for the trace data in

frequency/amplitude pairs. The .trc extension is for files that

include both trace and state data. The .trc file data is only

readable by the analyzer.

Example: :MMEM:STOR:TRAC TRACE3,mytrace.trc

Range: Trace labels are: TRACE1|TRACE2|TRACE3|TRACE4|ALL

Remarks: This command will fail if the <file_name> already exists.

Key access: > Save > Type > Trace

File/