Technical data

Command Reference 5

N9320A Programmer’s Guide 87

Load a Trace From a File to the Instrument

:MMEMory:LOAD:TRACe <file_name>

The contents of the file are loaded into TRACE1. The file

name must have a file extension of :trc. The file extension

determines whether a trace is loaded, or a trace with its

state, are loaded. The :trc extension is for files that include

both trace and state data.

Example: :MMEM:LOAD:TRAC mytrace.trc

Remarks: See also commands :MMEMory:LOAD:STATe

and:MMEM-

ory:STORe:STATe

If the revision of the state being loaded is newer than the

revision of the instrument, no state is recalled and an error

is reported.

If the revision of the state being loaded is equal to the

revision of the instrument, all regions of the state will be

loaded.

If the revision of the state being loaded is older than the

revision of the instrument, the instrument will only load the

older regions of the state.

Store a Limit Line in a File

:MMEMory:STORe:LIMit LLINE1|LLINE2,<file_name>

Stores the specified limit line to the specified file in

memory.

Example: :MMEM:STOR:LIM LLINE2,mylimit.lim

Remarks: This command will fail if the <file_name> already exists.

There is no SCPI short form for parameters

LLINE1|LLINE2.

Key access: > Save > Type > Limits

File/