Technical data

Getting Started 1
N9320A Programmer’s Guide 3
Connecting the N9320A to a PC via the USB Port
No extra driver is required to connect the N9320A via the
USB port to a PC. All you need is the Agilent IO libraries
suite and you can find this IO libraries suite in the
documentation CD in the shipment along with your N9320A.
Or download the IO libraries suite from Agilent website:
http://www.agilent.com/find/iolib
Refer to the following steps to finish the connection:
1 Install Agilent IO libraries suite
2 Switch on the N9320A
3 Connecting the spectrum analyzer to a PC with a USB cable.
Connecting instrument
Connecting PC