Technical data

74 N9320A Programmer’s Guide
5 Command Reference
Specturm Emission Mask measurement State
:CONFigure:SEMask
This command places the analyzer in Spectrum Emission
Mask measurement state. CONFigure subsystem commands
used for measurements in the MEAS menus.
Key access:
> SEM
Third Order Intermodulation measurement State
:CONFigure:TOI
This command places the analyzer in Third Order
Intermodulation measurement state. CONFigure subsystem
commands used for measurements in the MEAS menus.
Key access:
> TOI
Query the measurement State
:CONFigure?
This command query the current measurement state.
CONFigure subsystem commands used for measurements in
the MEAS menus.
Meas
Meas