Technical data

Command Reference 5
N9320A Programmer’s Guide 73
CONFigure Subsystem
ACP measurement State
:CONFigure:ACPower
This command places the analyzer in Adjacent Channel
Power measurement state. CONFigure subsystem commands
used for measurements in the MEAS menus.
Key access:
> ACP
Channel Power measurement State
:CONFigure:CHPower
This command places the analyzer in Channel Power
measurement state. CONFigure subsystem commands used
for measurements in the MEAS menus.
Key access:
> Channel Power
Occupied Bandwidth Width measurement State
:CONFigure:OBWidth
This command places the analyzer in Occupied Bandwidth
measurement state. CONFigure subsystem commands used
for measurements in the MEAS menus.
Key access:
> OBW
Basic Spectrum Analyzer State
:CONFigure:SANalyzer
This command causes the present measurement to exit, and
places the analyzer in Spectrum Analyzer mode. CONFigure
subsystem commands used for measurements in the MEAS
menus.
Key access:
> Meas Off
Meas
Meas
Meas
Meas