Technical data

66 N9320A Programmer’s Guide

5 Command Reference

Set Reference Level to the Marker Value

:CALCulate:MARKer[n][:SET]:RLEVel

Sets the reference level to the specified marker amplitude. In

delta marker mode, the reference level is set to the

amplitude difference between the markers.

Key access:

> Mkr –> Ref Lvl

Set Start Frequency to the Marker Value

:CALCulate:MARKer[n][:SET]:STARt

Sets the start frequency to the value of the specified marker

frequency. In delta marker mode, the start frequency is set

to the marker delta value. This command is

not available

in zero span.

Key access > Mkr –> Start

Set Center Frequency Step Size to the Marker Value

:CALCulate:MARKer[n][:SET]:STEP

Sets the center frequency step size to match the marker

frequency. In delta marker mode, the center frequency step

size will be set to the frequency difference between the

markers. Select the delta marker mode with

:CALCulate:MARKer[n]:MODE DELTa. This command is

not available if the delta marker is off, or in zero span.

Key access:

> Mkr –> CF Step

Set Stop Frequency to the Marker Value

:CALCulate:MARKer[n][:SET]:STOP

Sets the stop frequency to the value of the active marker

frequency. In delta marker mode, the stop frequency is set

to the marker delta value. This command is not available in

zero span.

Key access:

> Mkr –> Stop

Marker