Technical data

Command Reference 5

N9320A Programmer’s Guide 65

Optimize Phase Noise

:CALCulate:MARKer:PHNoise:OPTimize ON|OFF|1|0

Turns on/off the phase noise optimization function.

This is

only available when SPAN is set less than 50 MHz.

*RST: Off

Key access:

> Functions > Optimize Phase Noise

Read Phase Noise

:CALCulate:MARKer:PHNoise:Y?

Read the phase noise value.

*RST: Off

Key access:

> Functions > Phase Noise > Phase Noise On Off

Peak to Peak Delta Markers

:CALCulate:MARKer[n]:PTPeak

Positions delta markers on the highest and lowest points on

the trace.

*RST: Off

Key access: > Pk-Pk Search

Set Center Frequency to the Marker Value

:CALCulate:MARKer[n][:SET]:CENTer

Sets the center frequency equal to the specified marker

frequency, which moves the marker to the center of the

screen. In delta marker mode, the center frequency is set to

the marker delta value. This command is not available in

zero span.

Key access:

> Mkr –> CF

Marker

Peak

Marker