Technical data

64 N9320A Programmer’s Guide

5 Command Reference

Peak to Peak Delta Markers

:CALCulate:MARKer[1]|2|3|4:PTPeak

Positions delta markers on the highest and lowest points on

the trace.

*RST: Off

Key Access: > Pk-Pk Search

Turn on/off Phase Noise

:CALCulate:MARKer[n]:PHNoise:[STATe]ON|OFF|1|0

:CALCulate:MARKer[n]:PHNoise:[STATe]?

Turns on/off the phase noise function for the specified

marker. To query the value returned by the function, use

:CALCulate:MARKer:PHNoise:Y?

Remarks: When a measurement under the front panel MEAS key is

started, this command is turned off.

Key access:

> Function > Phase Noise

Set the Phase Noise Offset Manual

:CALCulate:MARKer:PHNoise:OFFSet:FREQuency

<freq>

:CALCulate:MARKer:PHNoise:OFFSet:FRRQuency?

Set the maker offset in phase noise measurement manually.

*RST: 0.00 kHz

Key access:

> Functions > Phase Noise > Offset Manual

Set the Phase Noise Offset

:CALCulate:MARKer:PHNoise:OFFSet

1kHz|-1kHz|10kHz|-10kHz|20kHz|-20kHz|30kHz|-30kH

z|50kHz|-50kHz|100kHz|-100kHz|1MHz|-1MHz

Set the maker frequency offset in phase noise measurement.

Key access:

> Functions > Phase Noise > Offset

Peak

Marker