Technical data

Command Reference 5

N9320A Programmer’s Guide 61

Marker Peak (Maximum) Search

:CALCulate:MARKer[n]:MAXimum

Performs a peak search based on the search mode settings

:CALCulate:MARKer:PEAK:SEARch:MODE.

Key access:

> Peak Search

Marker Peak (Maximum) Left\Right Search

:CALCulate:MARKer[n]:MAXimum:LEFT

:CALCulate:MARKer[n]:MAXimum:RIGHt

Places the selected marker on the next highest signal peak

to the left/right of the current marked peak.

Remarks: The marker will be placed at the next highest peak that rises

and falls by at least the peak excursion above the peak

threshold. If no peak meets the excursion and threshold

criteria, a No Peak Found error is given.

Key access: > Next Pk Left | Right

Marker Next Peak (Maximum) Search

:CALCulate:MARKer[n]:MAXimum:NEXT

Places the selected marker on the next highest signal peak

from the current marked peak.

Remarks: The marker will be placed at the highest peak that rises and

falls by at least the peak excursion above the peak threshold.

If no peak meets the excursion and threshold criteria, a No

Peak Found error is given.

Key access: > Next Peak

Marker Peak (Minimum) Search

:CALCulate:MARKer[n]:MINimum

Places the selected marker on the lowest point on the trace

that is assigned to that particular marker number.

Key access: > Min Search

Peak