Technical data

Command Reference 5

N9320A Programmer’s Guide 59

CALCulate:MARKer Subsection

Markers All Off on All Traces

:CALCulate:MARKer:AOFF

Turns off all markers on all the traces.

Key access:

> All Off

Continuous Peaking Marker Function

:CALCulate:MARKer[n]:CPEak[:STATe] OFF|ON|0|1

:CALCulate:MARKer[n]:CPEak[:STATe]?

Turns on or off continuous peaking. It continuously puts the

selected marker on the highest displayed signal peak.

*RST: Off

Remarks: This command may not be used to activate a given marker.

Key access: > More > Continuous Pk On Off

Frequency Counter Marker Resolution

:CALCulate:MARKer:FCOunt:RESolution <real>

:CALCulate:MARKer:FCOunt:RESolution?

Sets the resolution of the marker frequency counter. Setting

the resolution to AUTO will couple the marker counter

resolution to the frequency span.

*RST: 1 kHz

Range: 0.1 Hz to 1 kHz

Default Unit: Hz

Key access:

> Function > Freq Counter > Resolution Auto Man

Marker

NOTE

This function is intended to maintain the marker on signals with a

frequency that is changing, and an amplitude that is not changing.

Peak

Marker