Technical data

Command Reference 5

N9320A Programmer’s Guide 123

[:SENSe]:POWer Subsection

Input Attenuation

[:SENSe]:POWer[:RF]:ATTenuation <rel_ampl>

[:SENSe]:POWer[:RF]:ATTenuation?

Set the input attenuator. This value is set at its auto value if

input attenuation is set to auto.

*RST: 20 dB

Range: 0 to 70 dB

Default Unit: dB

Key access: > Attenuation Auto Man

Input Port Attenuator Auto

[:SENSe]:POWer[:RF]:ATTenuation:AUTO OFF|ON|0|1

[:SENSe]:POWer[:RF]:ATTenuation:AUTO?

Select the input port attenuator range to be set either

automatically (On) by the Reference Level Setting or

manually (Off).

*RST: On

Key access: > Attenuation

Input Port Power Gain

[:SENSe]:POWer[:RF]:GAIN[:STATe] OFF|ON|0|1

[:SENSe]:POWer[:RF]:GAIN[:STATe]?

Turns the internal preamp on or off.

*RST: Off

Remarks: This command is only available with Option PA3 installed.

Key access: >

Int Preamp On Off

Amplitude