Technical data

Command Reference 5
N9320A Programmer’s Guide 117
Type of Averaging for Measurements
[:SENSe]:AVERage:TYPE VIDeo|RMS
[:SENSe]:AVERage:TYPE?
Successive measurements of data can be combined to
average out measurement variations. Detector is set to
average and Avg type is set to power (RMS) to measure RMS
voltage (avg power).
*RST: VID
Key access: > Average Type
[:SENSe]:BANDwidth Subsection
Resolution Bandwidth
[:SENSe]:BANDwidth|BWIDth[:RESolution] <freq>
[:SENSe]:BANDwidth|BWIDth[:RESolution]?
Specifies the resolution bandwidth.
Example: BAND 1 kHz
Range: 10 Hz to 3 MHz
Default Unit: Hz
Key access: > Resolution BW Auto Man
Resolution Bandwidth Automatic
[:SENSe]:BANDwidth|BWIDth[:RESolution]:AUTO
OFF|ON|0|1
[:SENSe]:BANDwidth|BWIDth[:RESolution]:AUTO?
Couples the resolution bandwidth to the frequency span.
*RST: On
Example: BWID:AUTO On
BW/
Avg
BW/
Avg