Technical data

116 N9320A Programmer’s Guide
5 Command Reference
Turn Averagi ng On/O ff
[:SENSe]:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:AVERage[:STATe]?
This command toggles averaging off and on. Averaging
combines the value of successive measurements to average
out measurement variations.
*RST: Off
Remarks: This command is turned off for video averaging
([:SENSe]:AVERage:TYPE VIDeo) When a measurement
under
key is started. If this command is turned on for
video averaging when any of the key measurements are
in progress, that measurement will be stopped.
Key access: > Average On Off
Turn Automatic Averaging On/Off
[:SENSe]:AVERage:TYPE:AUTO OFF|ON|0|1
[:SENSe]:AVERage:TYPE:AUTO?
Sets the averaging to be automatically set to the appropriate
type for the current measurement setup. Or allows you to
manually choose the type of averaging with
[:SENSe]:AVERage:TYPE.
When AUTO is On:
If the Y Axis Scale is not Linear or Log, then average type is
Video (Y Axis Scale) Averaging.
If the Y Axis Scale is Linear or Log, then average type is
Power Averaging.
If the Detector is Peak, Sample, or Negative Peak (not
Average), then average type is Video Average.
*RST: On
Key access: > Average Type Auto Man
Meas
Meas
BW/
Avg
BW/
Avg