Technical data

114 N9320A Programmer’s Guide
5 Command Reference
Couple and Man. If set to Couple, this is coupled to Rel Start to
make a flat limit line. If set to Man, Abs Start and Rel Stop you
can enter different values to make a sloped limit line.
*RST: Dependent upon Offset selected, please refer to the User’s
Guide for more details.
Range: –150 dB to 50 dB
Example: SEM:OFFS:LIST:STOP:RCAR –20 dB
SEM:OFFS:LIST:STOP:RCAR:COUP 0
Key access:
> More > Spectrum Emission Mask > Offset/Limits > More >
Rel Stop
Set the Fail Mask
[:SENSe]:SEMask:OFFSet:LIST:TEST ABSo-
lute|AND|OR|RELative,ABSolute|AND|OR|RELa-
tive,ABSolute|AND|OR|RELative,ABSolute|AND|OR|RE
Lative
[:SENSe]:SEMask:OFFSet[n]:LIST:TEST?
Displays the menu to select one of the following logic keys
for fail conditions between the measurement results and the
test limits: Absolute, Relative, Abs AND Rel, and Abs OR Rel.
Please refer to User’s Guide for further descriptions.
*RST: Dependent upon Offset selected, please refer to the User’s
Guide for more details.
Example: SEM:OFFS:LIST:TEST ABS,REL,ABS AND REL,ABS OR
REL
Key access:
> More > Spectrum Emission Mask > Offset/Limits > More >
More > Fail Mask
Meas
Meas