Technical data

Command Reference 5

N9320A Programmer’s Guide 101

*RST: EXPonential

Example: CHP:AVG:TCON EXP

Key access:

> Channel Power > Avg Mode

Set the Channel Integration BW

[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration

<freq>

[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration?

Press Integ BW to specify the range of integration used in

calculating the power in the channel, for example. set the

main (center) channel bandwidth. Note that the integration

bandwidth is displayed on the trace as two markers

connected by an arrow. Be sure the Span of the instrument is

set between 1 and 10 times the integration bandwidth.

*RST: 2.0 MHz

Default Unit: Hz

Range: 100 Hz - 3.0 GHz

Example: ACP:BWID:INT 5E6

Key access:

> Channel Power > Integ BW

Set the Channel Power Span

[:SENSe]:CHPower:FREQuency:SPAN <freq>

[:SENSe]:CHPower:FREQuency:SPAN?

Press Chan Pwr Span to set the analyzer span for the channel

power measurement.

*RST: 3.0 GHz

Default Unit: Hz

Range: Current integration bandwidth to 10 times the integration

bandwidth or span of your analyzer.

Example: CHP:FREQ:SPAN 2 MHz

Key access:

> Channel Power > Chan Pwr Span

Meas