User`s guide

80 N9320A Spectrum Analyzer
4 Key Reference
When trace average is on, the average type is shown on the
left side of the display. Selecting an average type manually
causes the analyzer to use that type without regard to other
analyzer settings and sets Avg Type to Man.
Key access:
Video Avg Video averaging averages the data as appropriate
for the y- axis scale. When Avg Type > Video Avg is
selected, “VAvg” appears on the left side of the
analyzer display if Average is On.
Key access: > Avg Type
Pwr Avg
Power averaging is performed by converting the
trace data from logarithmic to linear power units,
and then averaging the power trace data. When
Avg Type > Pwr Avg is selected, “PAvg” appears on
the left side of the screen if Average is On.
Key access: > Avg Type
BW/
Avg
BW/
Avg
BW/
Avg