User`s guide

Functions and Measurements 3
N9320A Spectrum Analyzer 67
4 Select the trace to save (1, 2, 3, 4 or all traces). For this
example, we will select trace 3:
Press Source > Trace 3
5 Enter a filename by pressing Name. Assume you name the
file “TEST1”. The alpha portion of the filename is selected
using the softkey menus. The numeric keypad is used for the
numeric portion of the filename. Press to accept the
filename and to terminate this process and return to the
Save menu.
The filename can be composed of alpha (A- Z) or numeric
(0- 9) characters in any combination. The analyzer will not
overwrite an existing file. If the filename already exists, the
status bar will display the message: “File already exists”. If a
filename is not edited, the analyzer will automatically
generate a name based on the type of file you are saving
(State: STATE, Trace: TRACE, Limits: LIMIT, Screen: SCREN). It
also generates a three digit integer, starting at 000 and
extending through 999, which it adds to the name, for
example: TRACE056.TRC. The analyzer will remember the
previously saved value even through a power cycle.
6 Press Save Now to save the file
“Saving Now” is displayed during this operation. In this
example, the status bar displays “Local/TEST1.TRC file saved”.
Enter
CAUTION
When saving a file to a USB storage device, do not disconnect the
USB device during the save operation. To do so may cause unexpected
data loss.