User`s guide

24 N9320A Spectrum Analyzer
2 Getting Started
Remote Control
The N9320A spectrum analyzer is capable of being connected
to a PC through a USB connection, allowing the analyzer to
be operated in remote mode.
The configuration for setting up a remote control for your
N9320A is easily done: connect your N9320A using a USB
cable to a PC which has had Agilent IO Libraries Suite
installed.
When connecting a PC to the spectrum analyzer, power on
the spectrum analyzer. The PC will then detect if there is a
connection to the spectrum analyzer.
To maximize the flexibility of the remote control feature, use
SCPI commands to create your own programs.
For more information about Agilent IO Libraries Suite, refer
to: http://www.agilent.com/find/iolib
For further information on remote control and programming,
refer to the N9320A Programmer’s Guide in the N9320A
Help Kit CD.
Remot e
Stan dby
On
TG SOU RCE CAL OUT
50MHz 10dBm
7
·
4
1
0
2
5
89
6
3
Back
Enter
Marker
Peak
Search
Marker
Auto
Tune
Det/
Display
File/
Prin t
BW/
Avg
View/
Trace
MeasMODE
Sweep/
Trig
Local
Save
N9320A SPECTRUM ANALYZER 9 kHz - 3.0 GHz
PROBE POWER
RF IN 50
50VDC M AX
30dBm 1W MAX
CAT Ⅱ
USB
cable