User`s guide

112 N9320A Spectrum Analyzer
4 Key Reference
Pwr on/Preset Accesses the following softkeys for the preset settings.
Key access:
Alignment Accesses the following softkeys that align the internal
circuitry of the analyzer, load default values for the
alignment system, and adjust the 10 MHz reference.
Key access:
Power on
Last Preset
Determines the state of the analyzer when the
analyzer is turned on. Power On set to Preset
recalls the analyzer settings previously with the
Preset function. Power On set to Last recalls the
analyzer settings when previously power off.
Key access: > Pwr on/Preset
Preset Type Selects User or Factory preset settings.
Key access: > Pwr on/Preset
User Pressing Preset recalls the analyzer
settings defined by Save User Preset.
Key access: > Pwr on/Preset >
Preset Type
Factory Pressing Preset recalls the analyzer
settings originally set at the factory.
Key access: > Pwr on/Preset >
Preset Type
Save User
Preset
Saves the active settings of the analyzer into
the User Preset register. To recall these settings,
select Preset Type to User.
Key access: > Pwr on/Preset
Preset/
System
Preset/
System
Preset/
System
Preset/
System
Preset/
System
Preset/
System
Align Accesses the Align softkeys.
Key access: > Alignment
All
(Ext Cable)
Initiates the alignment of systems
with a cable connected from the CAL
OUT to RF IN (Except option TG3).
Key access: > Alignment > Align
Preset/
System
Preset/
System
Preset/
System