User`s guide

2 N9320A Spectrum Analyzer
1Overview
Agilent N9320A at a Glance
The Agilent N9320A spectrum analyzer is a portable, swept
spectrum
analyzer with a frequency range of 9 kHz to
3.0 GHz. It can be a fundamental component of an
automated system. It can also be widely used in an
electronic manufacturing environment and in
functional/final/QA test systems.
The Agilent N9320A spectrum analyzer primary features and
functions are described below:
High sensitive measurement
The spectrum analyzer includes a pre- amplifier for signals in
the frequency range up to 3 GHz, enabling more sensitive
measurements. This feature is a great help in analysis of
weaker signals.
Pass/fail limits
Upper and lower limits can be set on the screen, thereby
enable the user to make fast, accurate, automated
PASS/FAIL judgments on trace data.
Four-trace detection display
The spectrum analyzer will display up to four independent
traces simultaneously.
SSB Phase Noise Measurement
The analyzer provides automated, single- sideband phase
noise measurement capability (dBc/Hz). The display includes
frequency offset and the noise value data.
Frequency counter with 0.1 Hz resolution
A built- in frequency counter allows the user to measure the
signal frequency with 0.1 Hz resolution.
•USB interface
USB data interface ports allow the user to save and transfer
a screen shot (in JPG format) to a USB storage device.