Specifications

SCPI Programming Reference

Introduction to the SCPI Language

Commands by Subsystem

Command Quick Reference

Reset State (*RST)

SCPI Error Messages

Compatibility Commands

Related Information

IO Libraries and Instrument Drivers

The Agilent IO Libraries Suite software is provided on the Agilent Automation Ready CD-ROM provided with your instru-

ment. Installation instructions are provided on the CD-ROM.

You can also download the Agilent IO Libraries Suite software, along with IVI-COM and LabVIEW drivers from the Agi-

lent Developer Network at www.agilent.com/find/adn.

N8900 Series Documentation

You can download this document at www.agilent.com/find/n8900-doc. This document is also provided on a N8900

Product Reference CD-ROM that can be ordered separately.

For detailed information about interface connections, refer to the documentation included with the Agilent IO Libraries

Suite. Or you can download the guide from the Web at www.agilent.com/find/connectivity.

Web Interface

The N8900 series provides a Web interface that is built into the instrument. You can use this interface over LAN for

remote access and control of the instrument via a Web browser. See Using the Web Interface for details.

Example Programs

There are several example programs on the product page Web site at www.agilent.com/find/n8900. These are applic-

ation-focused programs that demonstrate different programming environments.

72 Agilent N8900 Series Operating and Service Guide