Specifications

Front Panel Menu

This is an overview of the front-panel menus.

Press the Menu key to access the front panel menus.

For a brief tutorial on how to navigate the front panel menu, refer to Use the front panel menu.

1st Menu

Level

2nd Level

3rd & 4th

Levels

Description

Output Voltage Programs output voltage settings

Current Programs output current settings

Transient Mode Selects voltage and current transient modes

Step Programs the voltage and current step settings

Protect OVP Configures over-voltage protection settings

OCP Configures over-current protection settings

Clear Clears protection conditions and displays output status

States Reset Resets all instrument settings to the reset (*RST) state

SaveRecall Saves and recalls instrument settings

PowerOn Selects the power-on instrument state

System IO LAN Displays LAN commands

Settings View the currently active network settings

Modify

Modify the network configuration

(IP, Name, DNS, WINS, mDNS, Services)

Apply Applies the configuration changes and restarts

Cancel Cancels the configuration changes

Reset Performs an LXI LCI reset of LANsettings and restarts

Defaults Resets the network to the as-shipped defaults and restarts

USB Displays USB identification string

GPIB Display or change the GPIB address

Analog Sets the analog interface amplitude (5 V or 10 V)

22 Agilent N8900 Series Operating and Service Guide