Specifications

Command Quick Reference
[SOURce:] Commands
[SOURce:]
CURRent
[:LEVel]
[:IMMediate]
[:AMPLitude] <value> Sets the output current
:TRIGgered
[:AMPLitude] <value> Sets the triggered output current
:MODE FIXed|STEP Sets the transient mode.
:PROTection
:DELay <value> Sets the over-current protection delay.
:STATe 0|OFF|1|ON Enables or disables the over-current protection.
VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <value> Sets the output voltage
:TRIGgerred
[:AMPLitude] <value> Sets the triggered output voltage
:MODE FIXed|STEP Sets the transient mode.
:PROTection
[:LEVel] <value> Sets the over-voltage protection level.
STATus Commands
STATus
:OPERation
[:EVENt]? Queries the operation event register.
:CONDition? Queries the operation condition register.
:ENABle <value> Sets the operation enable register.
:NTRansiton <value> Sets the negative transition filter.
:PTRansiton <value> Sets the positive transition filter.
:PRESet Presets all Enable, PTR, and NTR registers.
:QUEStionable
[:EVENt]? Queries the questionable event register.
:CONDition? Queries the questionable condition register.
:ENABle <value> Sets the questionable enable register.
:NTRansiton <value> Sets the negative transition filter.
:PTRansiton <value> Sets the positive transition filter.
Agilent N8900 Series Operating and Service Guide 107