Specifications

Command Quick Reference
*RCL<value> Recalls a saved instrument state
*RST Reset
*SAV<value> Saves an instrument state
*SRE <value> Set service request enable register
*STB? Return status byte
*TRG Trigger
*TST? Performs self-test, then returns result
*WAI Pauses additional command processing until all device commands are done
INITiate Commands
INITiate
[:IMMediate]
:TRANsient Initiates the transient trigger system.
:CONTinuous
:TRANsient 0|OFF|1|ON Continuously initiates the transient trigger system.
LXI Command
LXI
:IDENtify
:STATe 0|OFF|1|ON Turns the front panel LXI identify indicator on or off.
MEASure Commands
MEASure
[:SCALar]
:CURRent
[:DC]? Takes a measurement; returns the averaged current.
:POWer
[:DC]? Takes a measurement; returns the averaged power.
:VOLTage
[:DC]? Takes a measurement; returns the averaged voltage.
OUTPut Commands
OUTPut
[:STATe] 0|OFF|1|ON Enables or disables the output.
:PON
:STATe RST|RCL0 Sets the output power-on state.
:PROTection
:CLEar Resets the latched protection.
106 Agilent N8900 Series Operating and Service Guide