Specifications

Specifications and Characteristics
Specifications and Characteristics
Specifications
Supplemental Characteristics
Common Characteristics
Autoranging Characteristics
Dimension Diagrams
Unless otherwise noted, specifications are warranted over the ambient temperature range of 0°C to 45°C after a 30-
minute warm-up period. Specifications apply from >2% to 100% of the rated voltage and from >1% to 100% of the
rated current, measured at the output terminals with local sensing (sense terminals not connected).
Supplemental characteristics are not warranted but are descriptions of performance determined either by design or by
type testing. All supplemental characteristics are typical unless otherwise noted.
Specifications and characteristics are subject to change without notice.
Specifications
Specification 5 kW
N8920A/
N8940A
N8921A/
N8941A
N8923A/
N8943A
N8924A/
N8944A
DC Ratings
Voltage:
Current:
Power:
0 - 80 V
0 - 170 A
5 kW
0 - 200 V
0 - 70 A
5 kW
0 - 500 V
0 - 30 A
5 kW
0 - 750 V
0 - 20 A
5 kW
Output ripple & noise
1
CV rms:
CV peak-to-peak:
16 mV
200 mV
40 mV
375 mV/300 mV
70 mV
350 mV
200 mV
800 mV
Load regulation
Voltage:
Current:
40 mV
255 mA
100 mV
105 mA
250 mV
45 mA
375 mV
30 mA
Voltage programming &
measurement accuracy
2
≤ 80 mV ≤ 200 mV ≤ 500 mV ≤ 750 mV
Current programming &
measurement accuracy
2
≤ 340 mA ≤ 140 mA ≤ 60 mA ≤ 40 mA
Transient response
3
Recovery Time:
Settling band:
≤ 1.5 ms
0.8 V
≤ 1.5 ms
2 V
≤ 1.5 ms
5 V
≤ 1.5 ms
7.5 V
1
From 20 Hz to 300 kHz for rms noise; from 20 Hz to 20 MHz for peak-to-peak noise
2
Accuracy specifications are warranted at 23°C ±5°C
3
Time to recover to within the settling band following a load change from 10% to 90% of full load
Agilent N8900 Series Operating and Service Guide 9