Product specifications

This series of 2000 watt DC power
supplies has the exceptional, proven
reliability that test system engineers
look for. It also has the unusual
combination of high efficiency
and low noise operation.
These DC power supplies can be
controlled either from the front
panel or via an analog programming
voltage. When used in a test system,
the fast up and down programming
helps decrease test time. Quickly
reacting protection features,
including CV/CC mode crossover
and over-voltage protection help
protect your valuable assemblies
from damage.
Lab-bench use is enhanced by the
fan-speed control, which minimizes
acoustic noise. The extremely low
ripple and noise helps the test
engineer make extremely accurate
current and voltage measurements.
High Performance DC Power Supplies speed and accuracy for test optimization
Spe cif icati ons
(at 0° to 55°C unless
otherwise specified)
6571A 6572A 6573A 6574A 6575A 6571A-
J03
Special order
option
More detailed specifications at www.agilent.com/find/6570
63
Front panel and analog control of output voltage and current
Fast, low-noise outputs
Fan-speed control to minimize acoustic noise
Protection features to ensure DUT safety
6571A-6575A
Single-Output
2000 W
Number of outputs 1 1 1 1 1 1
GPIB
No No No No No No
Output ratings
Output voltage 0 to 8 V 0 to 20 V 0 to 35 V 0 to 60 V 0 to 120 V 14 V
Output current 0 to 220 A 0 to 100 A 0 to 60 A 0 to 35 A 0 to 18 A 150 A
Programming accuracy
at 25°C ±5°C
Voltage 0.04% + 8 mV 20 mV 35 mV 60 mV 120 mV 14 mV
Current 0.1% + 125 mA 60 mA 40 mA 25 mA 12 mA 90 mA
Ripple and noise
from 20 Hz to 20 MHz
Voltage rms 650 µV 750 µV 800 µV 1.25 mV 1.9 mV 1.5 mV
peak-peak 7 mV 9 mV 9 mV 11 mV 16 mV 15 mV
Current rms 200 mA 100 mA 40 mA 25 mA 12 mA 150 mA
Load regulation and line regulation
Voltage 0.002%+ 300 µV 650 µV 1.2 mV 2 mV 4 mV 600 µV
Current 0.005%+ 10 mA 7 mA 4 mA 2 mA 1 mA 7 mA
Transient response time Less than 900 µs for the output voltage to recover 100 mV following a
change in load from 100% to 50% or 50% to 100% of the output current
rating of the supply
Supplemental Characteristics
(Non-warranted characteristics determined by design and
useful in applying the product)
Average resolution
Voltage 2 mV 5 mV 9 mV 15 mV 30 mV 4 mV
Current 55 mA 25 mA 15 mA 8.75 mA 4.5 mA 40 mA
OVP 15 mV 35 mV 65 mV 100 mV 215 mV 28 mV
Output voltage
programming response time*
*Full load programming rise/fall time 30 ms 60 ms 130 ms 130 ms 195 ms 30 ms
(10% to 90% or 90% to 10%) with full
resistive load equal to rated output
voltage/rated output current.