Product specifications

DC Electronic Loads maximize throughput with real-life loading conditions
More detailed specifications at www.agilent.com/find/N3300
96
Decrease system development time Lower cost of ownership
Increase system reliability Increase test system throughput
Increase system flexibility Stable operation down to zero volts
DC connection terminal for ATE applications
N3300A-N3307A
Multiple-Input
150 W to 600 W
Control measurement speed vs. accuracy
Decrease the number of measure-
ment samples to achieve greater
measurement speed, or increase
the number of samples to achieve
higher measurement accuracy. You
can optimize your measurements
for each test.
Control rising and falling slew
rates separately
Reduce rate of loading change when
necessary for DUT stability or to
simulate real life conditions, but
otherwise change load values at
maximum rate.
Increase System Flexibility…
for Both Present and
Future Requirements
Most power supply and battery char-
ger test systems designed today need
to test a variety of products and/or
assemblies. In the future, additional
products or assemblies may be need-
ed. A flexible family of electronic
loads makes present system design
and future growth much easier.
Test low voltage power supplies
The N3300A series electronic loads
operate with full stability down to
zero volts. Many other electronic
loads available today have been
found to become unstable in the
operating region below one volt.
When designing power supply test
platforms, the trend towards lower
voltage requirements should be
taken into account. Refer to the
specification and supplemental
characteristic tables for details
of lower voltage operating charac-
teristics.
Choose DC load connection method
Automatic test systems need
consistency and reliability. Option
UJ1 8 mm screw connectors provide
a simple screw onto which your
wires, terminated with insulated
ring terminals, may be securely
mounted. This optional connector
is specifically designed for test
systems. Wires may exit the plastic
cover in any direction, and multiple
wires may be placed on each screw
terminal for easy parallel load
connections. Up to AWG 4 wire
may be used.
Applications which require repeated
connections/disconections are better
suited to the standard connector.
The standard connector accepts
an unterminated wire, and may
be hand-tightened. This connector
is specifically designed for bench
applications and short-term auto-
mated tests.
Increase Test Throughput
Today’s high volume manufacturing
requires optimization of test system
throughput, to maximize production
volume without increasing floor-
space. The N3300A series electronic
loads can help you in a number of
ways to achieve this goal.
Reduced command processing time
Commands are processed more
than 10 times faster than previous
electronic loads.
Automatically execute stored
command sequences
“Lists” of downloaded command
sequences can execute independent
of the computer, greatly
reducing the
electronic load command
processing
time and computer interaction time
during product testing.
Programmable delay allows for either
simultaneous or sequential load changes
This is the most efficient way to
conduct testing of multiple output
DC power supplies, simulating real-
life loading patterns, with a mini-
mum of programming commands.
Buffer measurement data
Voltage, current, and power mea-
surements can be buffered for later
readback to the computer, reducing
computer interaction.
Standard DC Option UJ1 8 mm
connectors screw connectors