Specifications

New instrument category
The Agilent N6705 DC Power
Analyzer represents an entirely
new instrument category for R&D
engineers. It provides unrivaled
productivity gains when sourcing
and measuring DC voltage and cur-
rent into a DUT. Using the Agilent
N6705 DC Power Analyzer, R&D
engineers can gain insights into
the DUT’s power consumption in
minutes without writing a single
line of code. It provides an easy-to-
use interface, with all sourcing and
measuring functions available from
the front panel. When automated
bench setups are required, the
N6705B is fully programmable
over GPIB, USB, LAN and is LXI
Class C Compliant.
Modular System Based on
DC Power Supply Outputs
The Agilent N6705B DC power
analyzer is a modular system that
is tailorable to meet specific test
needs. At the heart of the DC
power analyzer is the DC power
module. The Agilent N6705B DC
power analyzer is a mainframe that
has four slots to accept one to four
DC power modules. Each DC power
module takes one slot, except for
the N6753A and N6754A 300 W high
performance
autoranging DC power
High Performance DC Power Supplies speed and accuracy for test optimization
Specific ation s
(at 0° to 55°C unless
otherwise specified)
N6730B N6740B N6770A N6751A N6753A N6754A
N6752A Note
More detailed specifications at www.agilent.com/find/N6705B
87
Flexible configuration to meet your power sourcing and analysis requirements
4-slot mainframe that accepts up to 4 DC power modules
600 W total DC power module output power
The modules are ordered separately
Modular DC Power Analyzer
600 W GPIB, LAN, USB, LXI Class C
Output ratings
Voltage
6 models 6 models 4 models 50 V 20 V 60 V
5 V to 100 V 5 V to 100 V 20 V to 100 V
Current 6 models 6 models 4 models 5 A 50 A 20 A
0.5 A to 10 A 1 A to 20 A 3 A to 15 A 10 A
Power 50 W 100 W 300 W 50 W 300 W 300 W
100 W
Autoranging No No No Yes Yes Yes
Measurement accuracy
Voltage 0.1% + 0.1% + 0.1% + 0.05% + 0.05% + 0.06% +
50 mV 50 mV 50 mV 20 mV 10 mV 25 mV
Current 0.15% + 0.15% + 0.15% + 0.1% + 0.1% + 0.1% +
20 mA 20 mA 20 mA 4 mA 30 mA 8 mA
Noise (20 Hz to 20 MHz) 20 mVpp 20 mVpp 40 mVpp
0.35 mVrms 1 mVrms 1 mVrms
4.5 mVpp 5 mVpp 6 mVpp
Polarity reverse relays Optional Optional Optional Not Optional Optional
available
Output relays Optional Optional Optional Optional Optional Optional
*Key Specifications (Approximate values for families of modules – see data sheet for specifics)
Scope: Up to 100 kHz digitizer for N673x, N674x, N675x, N676x, N677x, and N6783 modules;
Up to 200 kHz for N678x SMUs
ARB: Approx max bandwidth = 5 kHz for N675x and N676x modules; 500 Hz for N673x, 4x, 7x, and 83 modules;
100 kHz for N678x SMUs
Note: Requires special installation. Instructions ship with the module.
N6705B
modules, which occupy two slots.
The N6705B
accepts the same mod-
ules as N6700 Low-Profile Modular
Power System. Select from more
than 20 different DC power modules
ranging in capability from basic to
high precision/source measure unit,
and in power from 20 W to 300 W.
This modular design gives you the
flexibility to mix and match over
twenty different DC power modules
to create a solution optimized to
meet specific test requirements.