User`s guide

25
User’s Guide
Agilent Technologies
2
Hardware Setup and Configuration
“Step 1. Unpack the N8201A Performance Downconverter" on page 26
“Step 2. Connect LAN Cables and Turn On Power" on page 27
“Step 3. Verify Connection with Synthetic Instrument Finder" on page 30
“(Optional) Step 4. Connect to the Agilent N8201A Option H02
Spectrum Analyzer GUI" on page 32
“(Optional) Step 5. Connect to an SA Remote Web Server" on page 34
“(Optional) Step 6. Verify Operation < 3 GHz" on page 41
“(Optional) Step 7. Verify Operation > 3 GHz" on page 45
“Troubleshooting" on page 48
• “Alternative Ways to Verify Connectivity to the PC" on page 48
• “How to Reset the LAN Configuration" on page 53
• “How to Set a Static IP Address" on page 54
• “How to Troubleshoot Connectivity Problems on the Network" on page 58
• “How to Determine a PCs Configuration Settings" on page 58
• “If the Instrument was Unable to Join the LAN" on page 60
• “If the LAN LED is Red" on page 60”
• “If the Instrument’s IP Address or Hostname Cannot be Found with Ping" on page 61
• “If the Instrument is Not Found by the Synthetic Instrument Finder" on page 61”
• “If the Instrument’s Hostname and PC Cannot Communicate" on page 61”
• “If the Instrument Web Page is Not Visible" on page 62”
• “If the Software Driver Will Not Open the Connection" on page 62”