User`s guide

24 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
1 Software Installation
2
Follow the installation instructions and accept the default settings.
3 Click Finish.
4 Click Cancel on the Configure dialog box. This step will be completed later in the
process after restarting the computer.
5 Close the Agilent N8201A Performance Downconverter Software and Driver Installation
menu (driver_installation_list.pdf dialog box).
6 Click Exit CD-ROM. The software and driver installation is complete.
7 Restart the computer and continue to “Hardware Setup and Configuration" on page 25.
NOTE
Restart the computer!