Technical data

614 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz

28 Programming Fundamentals

EIA/TIA 568B Wiring Information

This cable can be used to cascade hubs or to make point-to-point connections without a

LAN hub.

Table 15 Straight-Through Cable (Unshielded-twisted-pair (UTP) cable with RJ-45

connectors)

Standard, Straight-Through Wiring (each end)

Signal Name RJ-45 Pin # Wire Color Pair #

RX+ 1 white/orange 2

RX- 2 orange

TX+ 3 white/green 3

TX- 6 green

Not

Used

4blue 1

5white/blue

7white/brown4

8brown

Table 16 Cross-Over Cable (Unshielded-twisted-pair (UTP) cable with RJ-45 connectors)

Cross-Over Wiring

* Either end of this cable can be used at the instrument or LAN device. The connector names are

a convention useful during cable construction only.

Connector A Connector B

Signal Name RJ-45 Pin # RJ-45 Pin # Signal Name

RX+ 1 3 TX+

RX- 2 6 TX-

TX+ 3 1 RX+

TX- 6 2 RX-

Not

Used

44Not

Used