Technical data

Amplitude / Y Scale 2
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 59
Example:
UNIT:POW A
dBμV
Sets the amplitude units to dBμV.
Key Path: AMPLITUDE / Y Scale, Y Axis Units
Remote Command:
See“Y Axis Units" on page 56.
Example:
UNIT:POW DBUV
dBμA
Sets the amplitude units to dBμA.
Key Path: AMPLITUDE / Y Scale, Y Axis Units
Remote Command:
See“Y Axis Units" on page 56.
Example:
UNIT:POW DBUA
dBμV/m
Sets the amplitude units to dBμV/m. This is a unit specifically applicable to EMI field
strength measurements. In the absence of a correction factor this unit is treated by the
instrument exactly as though it were dBmV. You must load an appropriate correction factor
using amplitude corrections for this unit to generate meaningful results. Therefore, this key
is unavailable unless one of the corrections is turned on (in Amplitude, Corrections menu)
and Apply Corrections is set to Yes.
Key Path: AMPLITUDE / Y Scale, More, Y Axis Units
Remote Command:
See“Y Axis Units" on page 56.