Technical data

Using the STATus System 27
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 567
Questionable Calibration Extended Needed Event Query
:STATus:QUEStionable:CALibration:EXTended:NEEDed[:EVENt]?
Returns the decimal value of the sum of the bits in the Questionable Calibration Extended
Needed Event register.
The register requires that the associated PTR or NTR filters be set before a condition
register bit can set a bit in the event register.
The data in this register is latched until it is queried. Once queried, the register is cleared.
Key Type: There is no equivalent front-panel key.
Questionable Calibration Extended Needed Negative Transition
:STATus:QUEStionable:CALibration:EXTended:NEEDed:
NTRansition <number>
:STATus:QUEStionable:CALibration:EXTended:NEEDed:
NTRansition?
Determines which bits in the Questionable Calibration Extended Needed Negative
Transition register will set the corresponding bit in the Questionable Calibration Event
register when the condition register bit has a negative transition (1 to 0). The variable
<number> is the sum of the decimal values of the bits that you want to enable.
Key Type: There is no equivalent front-panel key.
Factory Preset: 0
Range: 0 to 32767
Questionable Calibration Extended Needed Positive Transition
:STATus:QUEStionable:CALibration:EXTended:NEEDed:
PTRansition <number>
:STATus:QUEStionable:CALibration:EXTended:NEEDed:
PTRansition?
Determines which bits in the Questionable Calibration Extended Needed Positive Transition
register will set the corresponding bit in the Questionable Calibration Event register when
the condition register bit has a positive transition (0 to 1). The variable <number> is the
sum of the decimal values of the bits that you want to enable.
Key Type: There is no equivalent front-panel key.
Factory Preset: 32767 (all 1’s)
Range: 0 to 32767