Technical data

560 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
27 Using the STATus System
The instrument must be in the single measurement mode. If INIT:CONT ON, then the
command is ignored. Depending upon the measurement and the number of averages, there
may be multiple data acquisitions, with multiple trigger events, for one full trigger cycle.
Key Type: There is no equivalent front-panel key.
Remarks: See also the :INITiate:IMMediate command
Front Panel Access: Restart
Self Test Query
*TST?
NO tests are performed. *TST? always returns 0.
Key Type:
There is no equivalent front-panel key.
Wait-to-Continue
*WAI
Causes the instrument to wait until all pending commands/processes are completed before
executing any additional commands. There is no query form for the command.
The instrument does not wait for completion of all processes. The processes that are
monitored are identified in the *OPC? command description.
Key Type: There is no equivalent front-panel key.
Example:
INIT:CONT OFF; INIT;*WAI