Technical data

Trig 26
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 531
Trigger In
Sets the trigger to start a new sweep or measurement whenever the external voltage
(connected to EXT TRIGGER INPUT on the front panel) passes through approximately 1.5
volts.
Key Path: Tr ig
State Saved: Saved in Instrument State
Factory Preset: 1.5 V
Remote Command:
See “Trig" on page 527.
Example:
TRIG:SOUR EXT to select front panel external triggering.