Technical data

System 24
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 505
Remote Command:
:SYSTem:SECurity:ENABle ON|OFF
:SYSTem:SECurity:ENABle?
Remote Command Notes:
This command allows the security state to be set and queried from a SCPI port. Note that
the command sets security to the “enabled” mode, which will turn on the security mode at
the next power-on cycle. When the parameter is OFF, the security mode will be set to off
only if the current security mode is “enabled” or “off.” If the security mode is on, this
command has no effect. The query form of the command always returns the current state of
the security mode (ON, OFF, or ENAB).
Example:
SYST:SEC:ENAB ON