Technical data

System 24
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 493
[:SENSe]:ROSCillator:EXTernal:FREQuency?
Example:
Before switching to the external reference source, specify the frequency of the external
reference that you plan to use.
ROSC:EXT:FREQ 20 MHz sets the external reference frequency to 20 MHz, but does
not select the external reference.
ROSC:SOUR EXT selects the external reference.
10 MHz Out
Switches the 10 MHz out signal on the front panel of the N8201A on or off.
Key Path: System, Reference
State Saved: Not saved in Instrument State. Not affected by factory preset or power
cycle. Reset to the factory default (Off, 10 MHz) by pressing System, Restore Sys Defaults.
Remote Command:
[:SENSe]:ROSCillator:OUTPut[:STATe] OFF|ON|0|1
[:SENSe]:ROSCillator:OUTPut[:STATe]?
Example:
ROSC:OUTP ON