Technical data

480 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
24 System
Factory Default: Mode
Remote Command: “Preset Type”
Example:
SYST:PRES:TYPE FACT defines the type of preset as the factory preset.
With factory preset selected, use SYST:PRES to do a factory preset.
Save User Preset
Saves the current state of the N8201A into the User Preset state register for recall when the
instrument Preset Type is set to User and you perform a preset operation. After you save a
state here, you must go to the Preset Type key and select User in order to have this state
used as the preset state. Refer to “Preset" on page 441 key description for the default
factory-configuration settings.
Key Path: System, Power On/Preset
Preset, if the preset type is set to User. See “Save User Preset" on page 447.
Remote Command:
:SYSTem:PRESet[:USER]:SAVE
Example:
SYST:PRES:SAVE
Use SYST:PRES:TYPE USER to set factory preset type to “User.”
Then use SYST:PRES to do the preset.