Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsTV Converter BoxN8201A
441442443444445446447448449450
449
User’s and SCPI Programming Guide
Agilent Technologies
20
Restart
This function restarts a previously paused measurement at the beginning. If the
measurement is active, it will stop it as soon as possible and restart it from the beginning.If
no measurement is active and Sweep (Single) is selected, a new sweep is initiated.
When in Average (On) mode, (BW/Avg, Average) the averaging function is restarted (the
trace is reset and the average number is reset to zero).
Key Path: Front-panel key. It can also be found under Meas Control.
Remote Command:
:INITiate:RESTart
Remote Command Notes:
This command is equivalent to sending an :ABORt command followed by an
:INITiate[:IMMediate] command. See “Abort the Sweep or Measurement (Remote
Command Only)" on page 232 for more information.
Example:
INIT:REST