Technical data

446 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
19 Preset
Factory Preset
This key is available only when the preset type is set to User. Press System, Power
On/Preset, Preset Type, Factory.
A factory preset returns instrument settings to the factory default values. If you are not
already in the spectrum analysis mode, it switches to that mode. A factory preset does not
reset “persistent” functions such as time/date display style, or auto-alignment state (see
“Restore Sys Defaults" on page 498.)
Key Path: Preset
Remote Command:
:SYSTem:PRESet. See “:SYSTem:PRESet” on page 186.
Remote Command Notes:
This command will not reset “persistent” functions such as GPIB address, time/date
display style, or auto-alignment state to their factory defaults. Use
SYSTem:PRESet:PERSistent. See “Restore Sys Defaults" on page 498.
Example:
SYST:PRES:TYPE FACT selects the factory type preset
SYST:PRES immediately presets the N8201A to its factory defaults