Technical data

Mode Setup (Spectrum Analysis Mode) 17

Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 427

Application Mode Number Selection (Remote command only)

Select the measurement mode by its mode number. The actual available choices depend

upon which applications are installed in your instrument.

Dependencies/Couplings: Other modes, besides Spectrum Analysis, must be

installed/licensed in your instrument before they appear in the

Mode menu. Some modes

also require the presence of specific hardware.

Factory Preset: 1 (Spectrum Analysis)

Preset Type Mode is selected, then the analyzer settings are preset but it stays in that

selected mode.

Remote Command:

:INSTrument:NSELect <integer>

:INSTrument:NSELect?

Remote Command Notes:

Enter one of the following integers in the command to set the analyzer mode.

Example:

INST:NSEL 14

Mode NSELect Number Mode Keyword

Basic 8 BASIC

Noise Figure 219 NFIGURE

Phase Noise 14 PNOISE

Spectrum Analysis 1 SA