Technical data

Mode Setup (Spectrum Analysis Mode) 17
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 423
Radio Std Setup
Accesses the key menu for selecting the device, packet type, or signal bandwidth to be
measured.
Key Path: Mode Setup
Remote Command:
There is no equivalent remote command.
Signal BW
Allows you to set the measurement bandwidth when Radio Std (None) is selected. This
function is available only when you select None as the standard.
Key Path: Mode Setup, Std Setup
Factory Preset: 3.0 MHz
Default Terminator: Hz
Range: The non-zero span range of the analyzer
Remote Command:
[:SENSe]:RADio:STANdard:SBWidth <freq>
[:SENSe]:RADio:STANdard:SBWidth?
Example:
RAD:STAN:SBW 2MHZ