Technical data

420 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
17 Mode Setup (Spectrum Analysis Mode)
DVB-T
Accesses the DVB-T key menu to enable you to select a DVB-T mask filtering standard.
Selecting a DVB-T filtering standard modifies spectrum analyzer settings for the CHP or
CCDF measurement activated under the
MEASURE menu.
L/SECAM/NICAM
Pressing L/SECAM/NICAM selects the filtering masks for the L/SECAM/NICAM analog
television system. This standard is only available for the channel power and CCDF
measurements
Key Path: Mode Setup, DVB-T
Remote Command: Use[:SENSe]:RADio:STANdard[:SELect] See “Radio
Std” on page 412.
Example: RAD:STAN DVBTLSN
G/PAL/NICAM
Pressing G/PAL/NICAM selects the filtering masks for the G/PAL/NICAM analog
television system. This standard is only available for the channel power and CCDF
measurements.
Key Path: Mode Setup, DVB-T
Remote Command: Use[:SENSe]:RADio:STANdard[:SELect] See “Radio
Std” on page 412.
Example: RAD:STAN DVBTGPN
I/PAL/NICAM
Pressing I/PAL/NICAM selects the filtering masks for the I/PAL/NICAM analog television
system. This standard is only available for the channel power and CCDF measurements.
Key Path: Mode Setup, DVB-T
Remote Command: Use[:SENSe]:RADio:STANdard[:SELect] See “Radio
Std” on page 412.
Example: RAD:STAN DVBTIPN