Technical data

396 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
15 Measurement Setup
SEM:OFFS:LIST:STOP:ABS:COUP 0
SEM:OFFS:LIST:STOP:ABS:COUP?
Rel Start
Enables you to enter a relative level limit at Start Freq ranging from –150.00 to +50.00 dBc
with 0.01 dB resolution.
Key Path: Meas Setup, Offset/Limits
State Saved: Saved in Instrument State.
Factory Preset: Dependent upon Radio Standard and device selected, refer to the default
tables for “Offset/Limits" on page 388 for this value.
Default Terminator: dBc
Range: –200 dBc to 50 dBc
Remote Command:
[:SENSe]:SEMask:OFFSet[n]:LIST:STARt:RCARrier
<rel_ampl>,... [<rel_ampl>] (up to five values)
[:SENSe]:SEMask:OFFSet[n]:LIST:STARt:RCARrier?
Remote Command Notes: Comma separated list. When offset F is off, this will be 5
values. When offset F is on, this will be 6 values. n = 1 for BTS and n = 2 for MS. Default is
BTS.
Example:
SEM:OFFS:LIST:STAR:RCAR –20 dBc
SEM:OFFS:LIST:STAR:RCAR?
Rel Stop
Enables you to enter a relative level limit at Stop Freq ranging from -150.00 to +50.00 dBc
with 0.01 dB resolution, and to toggle this function between Couple and Man. If set to
Couple, this is coupled to Rel Start to make a flat limit line. If set to Man, Rel Start and Rel
Stop you can enter different values to make a sloped limit line.
Key Path: Meas Setup, Offset/Limits
State Saved: Saved in Instrument State.