Technical data

378 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
15 Measurement Setup
Spur
Enables you to view any spurs that have been found. The measurement sets the N8201A to
the range in which the currently selected spur was found. The range settings changes only
if the selected spur is in the range that is different from the current range settings. A marker
identifies the currently selected spur on the trace.
This key is enabled only when Meas Type is set to Examine, and only upon completion of a
measurement.
Key Path: Meas Setup
Saved State: No values are saved to state.
Factory Preset: 1
Range: 1 to 200, 10 per range
Remote Command:
[:SENSe]:SPURious:SPUR <integer>
[:SENSe]:SPURious:SPUR?