Technical data

366 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
15 Measurement Setup
[:SENSe]:SPURious[:RANGe][:LIST]:BWIDth|BANDwidth:VIDeo
:AUTO OFF|ON|0|1 selects the mode.
[:SENSe]:SPURious[:RANGe][:LIST]:BWIDth|BANDwidth:VIDeo
<integer>
The query for this parameter will always return 20 values.
[:SENSe]:SPURious[:RANGe][:LIST]:BWIDth|BANDwidth:VIDeo
:AUTO?
[:SENSe]:SPURious[:RANGe][:LIST]:BWIDth|BANDwidth:VIDeo?
Sweep Time
Sets the sweep time of the N8201A. When Auto is selected the N8201A determines the
optimum setting, while Man enables you to determine the setting.
Key Path: Meas Setup, Range Table
Factory Preset: See Table 7 on page 363.
Range: Sweep time range of your N8201A.
Remote Command:
[:SENSe]:SPURious[:RANGe][:LIST]:SWEep:TIME:AUTO
OFF|ON|0|1, OFF|ON|0|1
[:SENSe]:SPURious[:RANGe][:LIST]:SWEep:TIME:AUTO?
[:SENSe]:SPURious[:RANGe][:LIST]:SWEep:TIME: <time>,
<time>,... (up to 20 sweeptimes)
[:SENSe]:SPURious[:RANGe][:LIST]:SWEep:TIME?
Remote Command Notes:
This parameter can receive up to 20 values. The location in the list sent corresponds to the
range the value is associated with. Missing values are not permitted, for example, if you
want to change values 2 and 6, you must send all values up to 6. Subsequent values will
remain as they were.
The query for this parameter will always return 20 values.
Example:
SPURious:SWEep:TIME:AUTO ON,OFF,ON
SPURious:SWEep:TIME 4ms,10ms