Technical data

362 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
15 Measurement Setup
Range Table
Enables you to enter the settings for up to 20 ranges, either using the instrument front
panel keys or remotely. Upon entering the range table, the measurement stops, then the
N8201A is set to a constantly sweeping idle state. The N8201A is then set to the current
values for range 1 (whether range 1 is on or off). If a range is currently off, the values in the
range table for that range are replaced with --- (see Range 5 in the illustration) to indicate
this range is currently inactive.
Key Path: Meas Setup
Saved State: All values for all ranges are saved in Instrument State.
Factory Preset: For each range, the following settings are selected:
Video BW (Auto),
Sweep Time (Auto),
Absolute Limit = - 50 dBm,
Peak Threshold = - 90 dBm,
Peak Excursion = 6 dB, and
Abs Stop Limit Mode (Auto) is set to -50 dBm
Attenuation (Auto)
Detector 1 = Peak
Detector 2 = Off